•
1 9

EZCooldown

Compleet BodyCool Pro koelvest

Compleet BodyCool Pro koelvest

€191.00 EUR
€191.00 EUR
Aanbieding Uitverkocht
Belastingen inbegrepen. Verzendkosten worden berekend bij de checkout.
Maat
PCM Temperatuur 7 Configuratie

See all avalible discounts

Ons BodycoolPro PCM Koelvest is speciaal ontworpen voor industriële omgevingen waar PCM (Phase Change Material) -koeling nodig is.
Dit degelijke koelvest biedt urenlang koelcomfort en preventie tegen hittestress. Elk vest wordt geleverd met 4 PCM packs die snel kunnen worden geactiveerd in een koelkast, vriezer of in ijswater. PCM heeft de unieke eigenschap dat het snel kan afkoelen en zeer langzaam weer warm wordt. Het kan koelte als het ware 'opslaan' en geleidelijk afgeven. Eenmaal geactiveerd behoudt PCM een constante, lage temperatuur gedurende lange tijd en zorgt voor een comfortabele koeling, zelfs tijdens inspannende activiteiten bij hoge temperaturen.. PCM packs kunnen eindeloos worden hergebruikt..

In de vier binnenzakken kunnen vier PCM packs worden geplaatsts: twee op de borst en twee op de rug. Het verwisselen van de packs kan in enkele minuten gedaan worden.
Dus terwijl je één set draagt, kun je een tweede set activeren in een koelkast, vriezer of een emmer ijswater. Door twee sets te rouleren blijf je de hele dag koel blijven!
Je kunt de geactiveerde sets ook in een koelbox of een geïsoleerde tas bewaren. Ze blijven tot 12 uur lang koel en klaar voor gebruik.

Alle details bekijken

Phase Change Material (PCM) Cooling Packs

Choosing a PCM Temperature

When you need maximum cooling for a short amount of time, choose the blue 15°C (59°F) PCM packs.
When you prefer longevity over absolute cooling ability, go for the yellow 21°C (70°F) PCM packs.
Next to these standard temperatures, we manufacture PCM inserts in other temperatures on request, ranging from 6.5°C (43°F) to 29°C (84°F). Please contact us for details.

Choosing a PCM Configuration

As well as different temperatures, we offer PCM packs in two different configurations:
The 8-cell packs are thin and flexible. They’ll fit under virtually any costume but offer less cooling longevity compared to the 4-cell packs.

The 4-cell packs contain approximately 35% more PCM so they’ll keep you cool for longer.
They’re a bit thicker though, so they’re less suitable under skin tight costumes.

How PCM cooling vests work video

About our PCM Cooling Packs

Our PCM packs use a revolutionary and unique biobased phase change technology to keep you comfortably cool. These packs can be worn directly on the skin without risking frostbite, tissue damage or discomfort.
Made in The Netherlands.

EZ Cooldown PCM packs can be quickly activated in your refrigerator or freezer. 
It’s best to not stack the packs as it will extend their activation time. 
The inserts can also be activated in ice water

Our PCM is USDA certified and REACH complient. Our biobased PCM is non-toxic, low-flammable, durable, reuseable, and 20% lighter than water.
EZCooldown PCM packs are designed and produced in the EU.

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
B
Ben
Worth buying?

The vest is very comfortable and durable. I chose to go with the blue 8 cell for inserts, i'm disappointed in how long they last roughly, 15 minutes in 100F with 80% humidity. I'm going to be ordering the 4 cell pack and see if that does better. I need them to last minimum of 2 hours when its 100F outside and I'm working hard (moving alot!) Hopefully, I'll have a better review by then.

Hi Ben,

Thanks for your review and for sharing your experience.

Fifteen minutes of cooling is unusually short, even under extreme conditions like 100°F, so I’d like to offer a few tips that might help.

PCM is keeping you cool as long as you can see bits of solid PCM crystals in the packs. Only when all PCM has turned liquid, the packs are depleted and need to be replaced or re-activated.
It is normal that the packs don’t feel cold anymore after 10 or 20 minutes. This is because your skin gets used to the PCM’s temperature and doesn’t register it as being ‘cold’ any longer. You can test this simply by removing the vest and touching your skin. It will feel quite cold as the surface of your skin is now about the same temperature as the PCM pack. As a result, the packs won’t feel cold, but the packs are still cooling your body.

Also keep in mind that using PCM packs directly from the refrigerator or freezer results in a much colder sensation, given their activation at temperatures of 5°C/41°F (refrigerator) or -18°C/0°F (freezer). The PCM packs will quickly warm to their phase change temperature, thereafter maintaining this temperature for several hours. Remember, PCM packs are engineered to cool at specified temperatures of 21°C/70°F or 15°C/59°F, rather than the colder temperatures of your refrigerator or freezer.

If your goal is a minimum of two hours of cooling in those conditions, I’d recommend trying the thicker 4-cell packs. Alternatively, our 70°F/21°C PCM packs might be worth considering as well — they provide a bit less intense cooling but generally last longer, which can make a big difference during physically demanding work in high heat.

If you need more help with finding the best PCM packs for your situation, please feel free to reach out. We're here to help!

m
michael higgins

This is my second vest. Great purchase!